• Tacho
  
• Encoder
  
• Combino
  
• Motors d.c.-a.c.
  
• Drives
  
• Accessories

COMBINO BLOCK

The smart, functional, easy, analogue/digital or full digital solution!

Combino is a concept made by free parts that must be mechanically assembled together with a number of possibilities. Always available at stock ex works.
All couplings are made by fully integrated joints, and clamped together with bolts on flanges. Hexagonal socket screw kit inside every pack.

View Combino PDF datasheet.

COMPONENTS:

RCO INT - Interface and encolosure cap IP44 ( IP55 available)

444(*)
RE.0444 Flange - shaft diam. 11x30mm and 7x30mm

CR1
Hollow shaft flange - diiam. 10mm e 12mm.

588
RE.0588 flange - diam.14x30mm (N e S); 15,87x35mm (G).

RPY
Special imperial flange

RCO 208 - Tacho

60V/1000rpm(*)
Silvercarbon brushes
IP55

50 e 20V/1000rpm
Silvercarbon brushes
IP55

RCO 058 - Incremental Encoder

Electronics
LD RS422 - 7/30V(*)
TTL - 5V; PUSH PULL

Pulse per round
256 - 360 - 500 - 512 - 1024(*) - 2048(*) (Standard)
Other special available

Output
12Pins Connector+ Female (*)
Arms Connector 7 and 10Pins + Female
Free cable

RCO E01 - Centrifuge Relè

Operating value
1100(*) - 1650(*) - 2200(*) - 2750rpm(*)
Other special available

RCO 15A / S - Resolver

Version A
7V - 10KHz - 50mA - IP55
Cable or connector output interface

Version S
4V - 10KHz - 35mA - IP55
Cable or connector output interface

Home Page